The Atwood RV Carbon Monoxide and Propane Gas Detector part # AT36681 will be an excellent replacement for the ProTECHtor LP Gas Detector. The Atwood RV Carbon Monoxide and Propane Gas Detector has a seven year life span which is pretty standard. The ProTECHtor LP Gas Detector has a two wire hookup (power/ground) and the Atwood RV Carbon Monoxide and Propane Gas Detector has a three wire hookup (power 1/power 2/ground). The reason for the three wire hookup is that the power 2 wire will... view full answer...
Based on the picture you provided the Atwood RV Propane Gas Detector - 12 Volt - White # AT36720 would be an exact replacement for your current Atwood RV Propane Gas Detector. view full answer...
Since the Atwood LP DOB 31013 is no longer available, your best option is to do a full replacement.
I recommend going with the:
-RV Propane Gas and Carbon Monoxide Detector # RS34FR for white, or the:
-RV Propane Gas and Carbon Monoxide Detector # RS54FR for black.
Both of these carbon monoxide detectors are flush mounted, measure 4-1/4" long, 2-5/8" wide, and 1/2" thick, and when either gas is detected a LED light and a loud horn will sound. view full answer...
I do have an option that will work for you, but I could not find anything specifically on the MTI SA-8.
If your current detector is a 2-wire design then the RV Propane Gas and Carbon Monoxide Detector # RS54FR (black) or # RS34FR will work as a replacement.
If your current detector is a 3-wire design, then you will want to use the Atwood RV Carbon Monoxide and Propane Gas Detector # AT36681. view full answer...
I tried finding information on the blinking green light on your Atwood Series 2001 LP Gas Detector but was unable to find anything that mentioned a blinking green light. The Atwood Series 2001 LP Gas Detector you have is no longer available which is likely why it was difficult to find information.
The Atwood Series 2001 LP Gas Detector does have a life cycle of 7 years +/- 128 days. This starts once the detector is first started up. If you believe you are close to or passed that 7 year... view full answer...
I wasn't able to find the Atwood 36720 RV Propane Gas Detector you mention, however I was still able to find the RV Propane Gas Detector # RS64FR in white, or # RS44FR in black to work as a replacement for your Protechtor Series 2001 LP Gas Detector.
This replacement will work with virtually any alarm, so it is likely to work with yours as well, and features the same two wire design as your current Protechtor Series 2001. view full answer...
I can tell you for sure that the Atwood RV Carbon Monoxide and Propane Gas Detector # AT36681 will work great to replace your current Atwood 36636 detector.
From what I was able to find on your current Atwood 36636, the Atwood RV Carbon Monoxide and Propane Gas Detector # AT36681 does look to be basically the same detector, just a newer version. view full answer...
We do have a propane gas detector you can use to replace your Atwood model 31013. The Atwood 31013 is no longer available, so it will not be a direct replacement. We have the:
-RV Propane Gas and Carbon Monoxide Detector # RS34FR for white, or the:
-RV Propane Gas and Carbon Monoxide Detector # RS54FR for black.
We also have the # RS44FR if you want it for detecting propane gas only.
All of these carbon monoxide detectors are flush mounted, measure 4-1/4" long, 2-5/8" wide, and 1/2"... view full answer...
For a propane gas leak detector, I recommend using the RV Propane Gas Detector - 12 Volt - 2 Wire # RS64FR (white) or # RS54FR (black). This detector requires 8V-15V of DC power and has overall dimensions of 4-1/4" long x 2-5/8" wide x 1/2" thick. It also comes with a large and small mounting bracket for your application. It is important to note that these detectors do not include the required flat 1/2" self-tapping screws. view full answer...
Your propane and carbon monoxide detector is faulty if it is blinking with no sound with no propane to the coach and it needs to be replaced. Use the RV Safe detector, which is available in either White or Black:
- White: RV Propane Gas and Carbon Monoxide Detector # RS34FR
- Black: RV Propane Gas and Carbon Monoxide Detector # RS54FR view full answer...
RV propane detectors will typically only have an internal battery and will not have one that you can replace. Two-wire systems like the RV Propane Gas Detector # RS44FR would wire directly to the trailer battery for power. view full answer...
The 2-Wire RV Propane Gas and Carbon Monoxide Detector # RS54FR is a flush mount design that has a cover plate with 7-1/4" length x 3-3/8" height x 1/4" thick with mounting holes that are center to center 6" apart so you should be able to easily cover the hole from your previous LP detector. view full answer...
The trim ring is not available, but the Atwood RV Carbon Monoxide and Propane Gas Detector # AT36681 can be mounted quite simply without it. I attached a page from the directions which shows how this is done; you simply remove the bezel from the detector, place the detector in the pre-cut hole and secure it with screws, then snap the bezel back on the detector. The other picture is from a customer showing how the unit looks when installed. view full answer...
The RV Propane Gas Detector part # RS64FR for white or part # RS44FR for black is what I recommend using to replace the the Atwood RV Propane Gas Detector part 31013 (Discontinued). The mounting plate for this new detector will cover up any holes you had for the previous so it will be a super clean install when finished. You'd just need to use some butt connector like part # DW05744-5 to attach the wires and you're good. view full answer...
The Atwood RV Carbon Monoxide and Propane Gas Detector # AT36681 is going to be the closest replacement to your ProTECHtor GS961LP-RV. It requires a 3-9/16" long x 3-7/16" wide x 1" deep cutout hole and will alert you to both unsafe carbon monoxide and LP gas leaks inside your RV. This detector has a 7 year lifespan, which is pretty standard, and will alert you when it's time for replacement. view full answer...
Your ProTECHtor is pretty old at this point and if it's constantly showing a red alarm light after resetting and there is no gas leaks then it is bad and would need to be replaced. Typically these need replacing at around 7 years. The Atwood RV Carbon Monoxide and Propane Gas Detector part # AT36681 will be an excellent replacement for the ProTECHtor LP Gas Detector. The Atwood RV Carbon Monoxide and Propane Gas Detector has a seven year life span which is pretty standard. view full answer...
Our best option for a Propane Gas Detector is the RV Safe RV Propane Detector which is available in black # RS44FR and in white # RS64FR. I was not able to find any information or references for the part number CL0380651 that you provided, but the RV Safe detector is basically a universal replacement. The alarm itself measures 4-1/4" long x 2-5/8" wide and it comes with two different size mounting brackets which allow it to fit in pretty much any space. view full answer...
You'll want to use a circuit tester # PTW2992 to see which of your trailer wires is your positive wire. The Atwood RV Carbon Monoxide and Propane Gas Detector AT36681 is a 3-wire detector and since you stated you only have two wires (white & Orange) you'll actually want to use a 2-wire detector like the 2-Wire RV Propane Gas and Carbon Monoxide Detector - 12 Volt - White # RS34FR instead. The black wire on this unit is your ground and the red wire will go to your power wire.
I've attached... view full answer...
We do have the RV Propane Gas and Carbon Monoxide Detector # RS54FR you are looking for. This is the RV Safe part number RVCOLP-2B. view full answer...
Go To Results